• <strong id="akbgr"></strong>

    <progress id="akbgr"><p id="akbgr"><code id="akbgr"></code></p></progress>
    <u id="akbgr"><small id="akbgr"><code id="akbgr"></code></small></u>
    <video id="akbgr"></video>

    <table id="akbgr"><p id="akbgr"></p></table>
    <b id="akbgr"><small id="akbgr"></small></b>

      August 2017 Newsletter: Volume 4, Issue 3

      A Message from the Director

      We reviewed the exciting outcomes of Themes 1 and Theme 2 in previous newsletters, so Themes 4 and 5 are highlighted this quarter. Thank you to Steve Koester, Kaushik Roy, and Sachin Sapatnekar for their good Theme leadership.

      As I was reading these brief histories of each Theme, I noticed that many “unexpected” breakthroughs arose from C-SPIN’s cross-disciplinary, multi-institutional vision, proving again that C-SPIN’s whole really is greater than the sum of its parts. Further proof of this is the recent review on the promising aspects of spin-based systems through C-SPIN’s vertical integration presented at DAC 2017. C-SPIN has truly been a one-of-a-kind research center in the computing electronics research and industry community – we should all be proud of our work together.

      I’m also convinced that C-SPIN’s efforts have re-positioned U.S. academia back to a leading position on spintronic research for computing and memory. This could not have happened without the generous support of our STARnet sponsors and the great vision of engineering leaders from the US semiconductor industry. The unique connections that PIs, post-docs, and graduate students have made with our sponsors will benefit all parties.

      Finally, I am highly pleased that much of the original C-SPIN research continues to stimulate a lot of new research around the world.

      Thanks to Mike Lotti and Marie Rahne again for preparing this issue of the newsletter.


      New Sputtering System Just in Time

      A new tool to rapidly advance spintronic research

      Industry’s loss has turned into C-SPIN’s gain. A virtually unused multi-chamber sputtering deposition system (MC-SD) is now in the University of Minnesota’s Nanocenter, nearly ready for industry and academic research.

      OLV System Figure 1. MC-SD sputtering system in a clean room at the UMN Nanocenter.

      The MC-SD machine was originally bought by Hitachi Global Storage Technologies (HGST) for approximately $4M from Oerlikon Leybold Vacuum (OLV). Before HGST could use the MC-SD for advanced materials research, however, the company was bought by Western Digital in 2012 – just before Jian-Ping Wang submitted the original white paper for C-SPIN. Western Digital phased out the HGST research arm that used the sputtering system, so the system sat unused until this year.

      When Jian-Ping Wang heard about the unused machine through industry connections, he began rallying donors. Soon C-SPIN, the University of Minnesota’s Office of the Vice President for Research, the Dean's Office of the College of Science and Engineering, and a few other sources had pledged $500,000, and the sputtering system was on its way to the Minnesota Nanocenter.

      OLV Interface Figure 2. User interface of the MC-SD sputtering system.

      “The incredible value of the deal made it easy to sell,” says Wang. “We were getting an industrial-level research tool for about 12 percent of the original purchase price. Moreover, we knew that plenty of academic and industry researchers outside of Minnesota would pay to use it.” Wang noted the special effort and leadership from Prof. Mos Kaveh, UMN’s Associate Dean of the College of Science and Engineering.

      With two 4-sputter chambers – one for metals one for non-metals – the MC-SD system can produce a wide variety of high-quality samples on industry-standard wafers (from 1-8 inches) in a short amount of time. It can also produce dozens of samples at once with a good repeatability.

      Figure 1 above is the user interface together with a top-down view of the MC-SD system, and figure 2 is a photograph of the system installed in a Minnesota Nanocenter cleaning room. The impressive specifications of the new system are listed in the table below.

      OLV System ?Table 1: The specifications of the MC-SD system.
      *2 stronger magnets for magnetic materials deposition in PM2 and 1 strong magnet in PM3.

      C-SPIN will wrap up its research in a few months, but it will still benefit from this system. Jian-Ping Wang’s group, for example, already plans to sputter SOT materials, Heusler alloys, and two different kind of MTJs for testing. Several companies have also expressed strong interest in using the system.

      C-SPIN extends thanks for the good teamwork from Prof. Bin Ma, Dr. Junyang Chen, Thomas Peterson, Protyush Sahu, Mr. Jonathon Fink, Mr. Gary Olin, Mr. Corey Ngo, Mr. Carlo Aliberti and Mr. Simone Colucci, and the strong supporting team from AVP technologies and Kenosistec. Also thanks to Marie Rahne and Kyle Dukart for setting up a the user tracking system and website for this system. The MC-SD system is currently being calibrated and is expected to be fully operational at the beginning of October. If you are interested in using the system, please contact Marie L. Rahne for more information.


      Looking Back, Looking Ahead: Theme 4

      Not long after C-SPIN was named a SRC STARnet center, the original Theme 4 members had to be changed. Even with a semi-scramble by C-SPIN Director Jian-Ping Wang and new Theme 4 leader Steve Koester, most of the Theme’s research started 2-3 months after the Center officially opened in January 2013. On the plus side of that scramble, however, was the addition of PIs Geoffrey Beach (MIT) and Maxim Tsoi (Univ. Texas Austin) to the Theme 4 team.

      Even after the addition of Beach and Tsoi, the Theme 4 goals didn’t change from the original proposal to STARnet:

      • Develop new device concepts based upon new spintronic material properties. These materials included antiferromagnets, ferromagnets with perpendicular anisotropy, and materials with strong-spin orbit coupling.
      • Develop a scalable, sub-20nm spin Hall MTJ that can be cascaded. This was, in essence, aimed at replacing binary CMOS devices with spintronic near-equivalents. Before 2013, such MTJs had only been developed in theory (by soon-to be C-SPIN PIs from Purdue).
      • Control the direction and increase the transmission length of spin information. Both of these were closely connected to research in Theme 2 and involved the development of graphene and spin-to-optical and optical-to-spin information transfer. The goals: 10GB/sec that consumes 10fj/bit and 10μm spin diffusion length.
      • Model non-volatile memory and logic devices and systems. This was a key goal for the entire Center, and it relied on partnership with Theme 5 and multiple materials development projects in other Themes.

      Expected Progress

      Theme 4 began – like the other C-SPIN Themes – with advances in measurement that lay the groundwork for other advances. In the first year, Chia-Ling Chien and Jian-Ping Wang developed new (and much more accurate) ways to measure the spin Hall angle of materials and interfaces. In the second year, Maxim Tsoi developed new methods for measuring antiferromagnetic (AFM) materials. In 2015, Supriyo Datta and his group published a groundbreaking paper in Scientific Reports that established quantitative and scalable modeling methodology for evaluating spintronic and nanomagnetic devices. These models are likely to be expanded and improved upon as more researchers use them and more spintronic materials and devices are developed.

      Mo Li and Jian-Ping Wang’s work with spin-optical systems resulted in significant breakthroughs. By the end of year 3, their teams had achieved two versions of all-optical switching, one of which was with an MTJ with an “optical” layer whose switching behavior could be detected electrically. In the past year, the team has continued to develop MTJs and switch them with 500 fs laser pulses. The advantage of these systems is simple: their main components operate at the speed of light.

      On the modeling front, Supriyo Datta and his team recently presented a new spintronic computing architecture – Probabilistic Spin Logic – that can perform highly complicated calculations both backwards and forwards. Importantly, the architecture is based on nanomagnets that already exist and function at room temperature. As with the 2015 Datta paper, this article will likely serve as a foundation for the testing and development of several new devices.

      C-SPIN has led a comprehensive effort in the world to find a practical way to address the external field free SHE switching for MTJ and integrated devices. Thus far, Chia-Ling Chien, Kang Wang and Jian-Ping Wang have each proposed an innovative approach.

      Unexpected Progress

      Theme 4 surprise #1 has probably been skyrmions. Skyrmions had been identified before C-SPIN began, but Geoff Beach was the first to stabilize them so they could be measured and manipulated at room temperature. Smaller than 5 nm, they have proven to be stable and rapidly switchable at room temperature. Along with topological insulators, they are promising materials for future spin-based memory and logic.

      Surprise #2 for Theme 4 is graphene. As graphene is one of the best spintronic channel materials in the world, C-SPIN researchers in Theme 2 and Theme 4 had planned on working with it from the beginning. It was thought that it would be an excellent material for all-spin logic, but Theme 4 researchers discovered that it’s even more valuable as a tunable spin channel. In other words, the distance spins travel in graphene can be changed by applying a control voltage. This property has allowed C-SPIN researchers to develop new ways of using graphene for computing systems – including neuromorphic systems – that are difficult to realize with traditional materials.

      Surprise #3 is Maxim Tsoi’s demonstration of the world’s first electrically induced magnetization switching of an AFM oxide through a point-contact measurement. With more development, AFM materials may be crucial to a number of spintronic devices in the future.

      A final surprise is Michael E. Flatté’s development of a completely new device concept based upon CSPIN’s pioneering effort on topological insulator spintronic materials from Theme 2 and the physics of magnetoelectric transduction. This approach uses a topological insulator – which has the highest efficiency of conversion of electric field to spin torque yet observed at room temperature – combined with a magnetic insulator to create an ultra-low-power spintronic switch. The insulator can be switched using an electric field, not a charge current, which dramatically reduces the power consumption for switching. Flatté performed theoretical calculations which show that this device can produce switching energies roughly 5 orders of magnitude lower than state-of-the-art CMOS. There are still some questions about this design. Further theoretical and experimental effort should be followed up. ?

      Looking Ahead

      Theme 4 PIs and their teams are currently working to publish all Theme 4 results so that other researchers in the field and in industry can further expand upon C-SPIN’s legacy.

      What will that expansion look like? In computational research, Theme 4 efforts to develop neuromorphic computing (based on graphene, topological insulators, and other novel materials) will likely have enormous impact in the rapidly growing “artificial intelligence” industry and will, of course, spur plenty of further university research. Non-volatile, low-power memory – and possibly logic – will also likely benefit from C-SPIN’s advances in skyrmions, magnetic tunnel junctions, and anti-ferromagnetic materials. As for spin-optical devices, the possibilities are endless: sensors, defense-related applications, quantum computing, secure communications, and others.


      Looking Back, Looking Ahead: Theme 5

      In 2012, spintronics was seen as one of several technologies that could potentially provide new computational platforms for the post-CMOS era. The problem: MTJ-based memories and logic, all-spin logic (ASL) circuits for digital logic, and early preliminary structures for neuromorphic information processing had been proposed, but simulations showed that they either consumed high levels of power or processed information slowly.

      Still, those theoretical conclusions were just that – theoretical. The sheer newness of spintronics as a major field of study meant that nobody really knew what nanomagnets could do for the computing industry. In fact, there were no robust spintronics-CMOS comparisons for spin injection efficiency, spin transfer, and numerous energy measures. So it was certainly possible that new spintronic architectures could spark a flurry of post-CMOS – or maybe even CMOS-enhancing – developments.

      Theme 5 was included in the original C-SPIN proposal to address such issues. As the proposal stated, Theme 5 would be “the first ever integrated effort led by university designers to bring spin technology closer to practical reality with the direct support and guidance by semiconductor industry.”

      Breakthroughs

      The major breakthroughs for Theme 5 have come from close alignment with research in materials, devices, and underlying spintronic technologies:

      • Neuromorphic computing. Clearly articulated as a goal in the original proposal, neuromorphic computing has moved much closer to reality through Theme 5 research. Novel circuits using domain wall based devices have resulted in orders-of-magnitude improvements in energy efficiency over prior CMOS-based techniques. These advances have the potential to enable rapid improvements in computer vision and recognition tasks that are at the heart of web search engines, automotive driver assistance systems, and autonomous robots.
      • Logic speed and energy efficiency. Although it’s “common knowledge” that spin-based logic technology is not as developed as spin-based memory, C-SPIN, together with engineers from STARnet sponsors (e.g. Intel, Micron, etc.), has developed two paths that rival CMOS in speed and energy efficiency: 1) enhanced ASL using Heusler alloys, which demonstrates another positive result of the Center’s intentional integration from materials and devices to circuits and architectures, and 2) CoMET (Composite-input Magnetoelectric Technology), a new method of conveying spin information developed by Sachin Sapatnekar, Jian-Ping Wang, Chris Kim and their C-SPIN students.
      • Benchmarking and comparative analysis. The development of new spintronic materials, devices, circuits, and architectures meant that new ways to measure and benchmark also had to be developed. A 2015 paper summarized the progress and challenges of spintronic research in light of CMOS performance. C-SPIN was the first to benchmark external-field-free Heusler alloys and SHE devices, and Sharon Hu contributed her expertise by developing ways to measure and compare non-volatile processors.
      • Novel memory designs based on the spin Hall effect show major gains in energy efficiency over traditional STT-RAM.
      • And a lot of other things…
        • Development of stochastic neurons and spiking neural networks
        • Architectures for solving NP-hard problems
        • An ADC converter based on MTJs
        • Development of non-volatile processors
        • Architecture for SOT-domino-style spin logic
        • Several designs for spin-CMOS hybrid systems.

      Surprises

      The original C-SPIN proposal noted that spintronics could potentially replace CMOS or complement CMOS. Nearly five years later, C-SPIN research has repeatedly shown that the real advantages of spintronic technology are best realized in complementing CMOS through the use of spin-specific circuits and architectures embedded within domain-specific accelerators. The best examples are neuromorphic computing and Probabilistic Spin Logic (PSL), two types of processing that can be done with CMOS but are orders of magnitude more efficient with architectures that take advantage of the unique properties of spintronic materials and devices.

      Looking Ahead

      A recent review on the promising aspects of spin-based systems, mostly stemming from Theme 5, was presented at DAC 2017.

      The work of Theme 5 will likely bear fruit in three primary ways as industry and academic researchers continue to embrace spintronics:

      1. Deeper integration with CMOS. As CMOS technology becomes more difficult to scale, designers are likely to use spintronic architectures (like neuromorphic and PSL) for certain functions (like image recognition and probabilistic calculations), freeing up CMOS circuits for more traditional processing.
      2. Computation-in-Memory. Traditional computational models face a major speed/energy bottleneck with communication between the processor and memory, particularly for big-data applications. C-SPIN has been developing computational RAM (CRAM), which implements logic-in-memory using only minor modifications to a conventional memory array. By performing certain calculations in the RAM instead of in the processor, significant amounts of energy and time can be saved.
      3. Approximate computing. A number of emerging applications do not require precise computational results, and spin-based logic is highly amenable to trading off computational accuracy for reduced circuit power. C-SPIN is exploring methods that use approximate computing to exploit this property.


      Register Now for the 2017 Annual Review

      The 2017 C-SPIN Annual Review will be held at the University of Minnesota September 27 - 28, 2017. Everyone planning to attend the annual review must REGISTER. Registration will close August 26, 2017. Please see the agenda page for more details about the review schedule. Details about the location of the review and nearby lodging options can be found on the C-SPIN website. We hope to see you again in Minneapolis!


      Student and Post-Doc Profiles

      Maghna Mankalale, Ph.D. Candidate, University of Minnesota

      Maghna Mankalale Maghna Mankalale

      I am currently working on developing novel low-power and high-speed spin-based logic devices, a project under Theme 5. The objective of this work is to use physics-based models to design and develop devices that can replace or complement existing CMOS transistors. In my first project, I worked on designing optimized all spin logic (ASL)-based standard logic gates like (N)AND, (N)OR, XOR, and inverter. I devised optimization techniques that considered the impact of layout factors during the design process. My techniques led to ASL gates that are up to 24% faster and up to 47% more energy efficient than previous versions. I also devised STEM, a novel two phase evaluation technique for ASL majority logic gates that provides up to 3.4x speed improvement and up to 6.9x improvement in energy dissipation over previous un-optimized ASL circuits.

      I have also been working on CoMET, a magneto-electric based device, with my colleague Zhaoxin Liang and in collaboration with Prof. Jian-Ping Wang's group. We explored different material parameter combinations to determine that CoMET could deliver a speed of sub-100 ps with an energy dissipation of sub-100 aJ, a significant improvement over most other spintronic devices. I have also collaborated with Prof. Sharon Hu and Prof. Michael Niemier's groups at University of Notre Dame, who have explored the use of CoMET in nonvolatile processors and determined that it leads to a 2.3x improvement in energy over ASL devices. My research under C-SPIN has led to four first-author publications.

      Prior to starting my PhD, I worked in the Design Automation group in IBM India for 6 years, where I worked on developing software tools for performing placement and routing of logic blocks during the design of an integrated chip (IC). This motivated me to work on challenging problems facing the IC design community. So when Prof. Sapatnekar offered me the PhD position to work on these problems in the area of spintronics, I grabbed it with both hands. The opportunity to work at the forefront of the beyond-CMOS revolution is truly exciting and I consider myself to be lucky to be a part of it.

      I plan to apply for faculty positions, and I eagerly look forward to using the skills and expertise I’ve developed to research new computing and storage devices. In particular, I hope to continue to work on viable candidates for replacing today’s CMOS transistor-based ICs. I believe my experience using novel physics-based models to propose new spin-based devices, coupled with a background in circuit theory and automation, makes me uniquely qualified to take up this challenge and position myself as a key player in the post-silicon revolution. I also enthusiastically look forward to working with and mentoring new technical talent in this area.


      Tobias Brown-Heft, Ph.D. Candidate, University California Santa Barbara

      Tobias Brown-Heft Tobias Brown-Heft

      I am currently working on MBE growth and characterization of atomic superlattices formed by pairs of Heusler materials for Theme 1. The project is based on some great theoretical work done a few years ago by Prof. Bill Butler’s group. They predicted that Heusler superlattices could produce a half-metal with perpendicular magnetic anisotropy and so would be an ideal contact for magnetoresistive memory devices. So far, the results are promising.

      I have also been working on chemical and electrical analyses to determine how annealing affects Co2MnSi-based magnetic tunnel junction interfaces – another application of magnetic Heusler materials for spintronics. I have also worked on the synthesis and magnetic characterization of Co2TiGe epitaxial thin films, which are predicted to possess time-reversal breaking Weyl fermion states. We have a few publications on these topics.

      I earned degrees in Physics and Chemistry before coming to UCSB in 2013. During my undergraduate years, I worked in an atom optics lab, so I didn’t have much experience with condensed matter systems. But I had two main goals: to create technical solutions to complex, real-world problems and to study lots of atoms at once, preferably magnetic ones. Needless to say, I’m achieving both at UCSB, so I enjoy my work immensely.

      I expect to continue researching magnetic and spintronic systems in industry after I graduate. I want my contributions to make it into the hands of consumers. I’m excited about the future of computing technology. The steady progress toward complexity, reliability, and energy efficiency is changing the world every day, and being part of that really appeals to me.

       
       
      色情AV论坛,同事帮我足交,黄色视频网站,www.青青草av.com
    1. 日日摸天天摸人人看,日日摸天天摸人人看在线观看,日日摸天天摸
    2. 爱色小萝莉导航我爱啪啪啪亚洲色综合高清无码av主播自慰棒插穴自慰
    3. 三河市
    4. 泰宁县
    5. 林口县
    6. 羞羞妹_青青草视频,青青草在线视频免费,青青草视频免
    7. 乐至县
    8. 赞皇县
    9. 天天操综合网大香蕉电影 大香蕉网 大香蕉在线影院 伊人大香蕉久久网
    10. 福利免费视频,草莓视频,草莓成人短片,草莓成人短片线上看
    11. 电白县
    12. 汉沽区
    13. 亚洲欧美,国产综合av,亚洲中文在线偷拍狼很色,日本高清色视频
    14. 山外人精品影院|欧美成人在线观看|亚洲Av欧美Av日本综合图区
    15. 日韩做爱视频网站国产?亚洲?欧美2018最新福理论利片电影网
    16. 含山县
    17. 国产福利不卡在线视频_一本道理在线不卡免费_日本红怡院一本道
    18. 怡紅院A V aV影片香蕉视频在线观看色视频在线日韩日本国产亚洲
    19. 在线精品国产在线视频,在线看片免费人成视频,一本大道香蕉大l在线
    20. 亚洲久久久久久中文字幕,国产 亚洲 中文字幕 久久网,久久综合色一.
    21. 宁陵县
    22. 成 人 国产系列_成 人网站 免费观看_国产成 人 综合 亚洲
    23. 二连浩特市
    24. 国产aⅴ视频视频不卡在线五月婷婷开心?中文字幕国产处女大香蕉
    25. 国产人妻熟妇在线视频-国产在线自在拍91-国产ar高清视频 视频
    26. 在线高清中文字幕电影,中文字幕无线码,中文字幕免费电影
    27. 夜夜橾天天橾b在线观看_天天日日狠狠 2019_天天啪久久爱视频精品
    28. 天天色,天天干,天天操,天天射,天天好逼网,天天色综合网
    29. 高清无码中文字幕视频_无码不卡中文字幕在线视频_在线中文字幕...
    30. 百度百度男朋友摸得我流水有点黏黏福利,天天看高清影视手机版
    31. 个旧市
    32. 中文字幕 制服 亚洲 另类 中文字幕av 亚洲 欧美 中文字幕 在线
    33. 白山市
    34. 天天看片高清观看-日日摸天天摸人人看-天天拍天天看免费视频
    35. 日本强奷在线播放,边吸奶边扎下面很爽,男女真人啪啦啪动态图
    36. 2019中文字字幕在线不卡,在线高清中文字幕电影,综合在线,日韩欧美
    37. 欧美成年性色生活片 毛片_在线中文字幕亚洲日韩_成 人国产在线观看
    38. 亚洲 另类 欧美 日本
    39. 大量偷拍情侣自拍视频_电影日本强奷在线播放_自拍 偷拍 综合图区
    40. 免费看啪啪,免费啪啪在线,国产啪啪在线,免费看啪啪视频
    41. 卢龙县
    42. 五月天婷婷久久啪,2019久久精品综合查询,万人靠青青视频,2019精品国产在线
    43. 福贡县
    44. 大量偷拍情侣自拍视频5x在线视频亚洲 亚洲中文无码永久免费
    45. 一本道理高清在线播放_一本道东京熬加勒比_波多野结衣一本道在线
    46. 天天嚕2017最新视频免费-天天日影院-夜夜橾天天橾b免费视频-天天碰天天摸公开视频
    47. 亚洲 欧美 中文字幕 在线 ,Α√无码亚洲不卡在线播放,日本无码AV...
    48. 亚洲手机在线人成视频_亚洲人成视频在线播放_亚洲人成视频在线
    49. 青草青草久热精品视频_久久99热只有频精品_99精品国产免费观看视频
    50. 贺兰县
    51. 男女做爰高清免费视频,男人吃女人奶,摸她下面,男友说我好紧
    52. 国产人妻熟妇在线视频-国产在线自在拍91-国产ar高清视频 视频
    53. 在线精品国产在线视频 国产亚洲精品俞拍视频 精品国产福利在线视频
    54. 洛川县
    55. 精品国产自在现线拍,一道本高清免费字幕,一本草中文字幕
    56. 在线 偷拍 欧美 动漫操操影院国产在线视频不卡二伊人青青草大香蕉
    57. 女lo漏逼图 亚洲第一狼人天堂网 黑人Jb捅的我好爽
    58. 高要市
    59. 天天影视网茄子视频电脑版久久爱免费频在线看7色婷婷综合缴情
    60. 精品亚洲国内偷拍视频_在线偷拍视频精品视频-在线精品国产在线视频
    61. 免费视频在线观看国产-情侣视频自拍偷拍-久草在线免费视频在线观看
    62. 威信县
    63. 日日摸天天摸人人看,日日摸天天摸人人看在线观看,日日摸天天摸人人看手机播放
    64. 内乡县
    65. 五月丁香综合缴情六月-丁香五月色六月综合缴情-五月丁香六月综合缴情基地
    66. 国产精品视频在线_国产精品视频在线观看_国产精品视频在线观看诱惑-天天射
    67. 午夜福利_啪啪啪啪电影视频_成人影片免费视频在线观看
    68. 久久播_久播电影网-亚洲人成电影网站免费-青青草观看-大香蕉视频 大香蕉网
    69. 一本道在线观看东京热综合,波多野结衣一本道在线 日本在线加勒比
    70. 南投县
    71. 松阳县
    72. 方山县
    73. 老司机电影网老司机电影天堂手机版黄色录像免费鬼父磁力链接
    74. 兰溪市
    75. 亚洲 制服 丝袜 无码 在线va亚洲va天堂va视频在线欧美一级整片在线播放色综合伊人色综合网站黑人一级大毛片
    76. 剑河县
    77. 卫辉市
    78. 曲周县
    79. 免费av亚洲国产在线-深夜福利-99精品国产免费观看视频
    80. 卓尼县
    81. 国产曰韩无码亚洲视频亚洲Va国产在线观看色噜噜狠狠综合影院
    82. 繁昌县
    83. 日本无码不卡高清免费v,日本一本道a不卡免费,在线高清免费不卡无码
    84. 丁香五月开心婷婷综合|色和尚五月天|欧美激情在线线路一|四虎影视地址最新在线2018
    85. av在线看,欧美图片亚洲小说图区,日本乱理伦片在线观看,黄鳝女主播
    86. 国产 亚洲 中文字幕 久久网 中文字幕人妻熟女人妻 亚洲久久久久久中文字幕
    87. 亚洲久久无码中文字幕,强乱中文字幕在线播放,国产 亚洲 中文在线 字幕
    88. 乌鲁木齐县
    89. 婷婷开心色四房播播|四虎影视在线地址最新|91国产精品情侣愉拍|伊人免费视频
    90. 东丽区
    91. 情色综合,亚洲色姐妹综合网姐姐,大香蕉综合伊人网,狼人干伊人网
    92. 奇米影视首页撸撸狠拨阴员1伊人大香蕉久久天天啪-奇米第四色
    93. 亚洲香蕉视频在线播放_大香蕉大香蕉最新视频
    94. 亚洲久久无码中文字幕,强乱中文字幕在线播放,国产 亚洲 中文在线 字幕
    95. 国产人妻少妇精品视频 国内大量揄拍人妻在线视频 日本高清不卡码无码v亚洲 在线观看国产人妻视频
    96. 99热在线视频观看免费,婷婷色婷婷开心五月四房播播,亚洲第一狼人,色迷迷
    97. 色姑娘综合网久久 一个色综合亚洲色综合 久久偷拍国产在线视频
    98. 日疯狂护士在线播放日本青青草原久久免费国产亚洲观看视频在线
    99. 情色综合网干综合,桃花色综合影院,色姑娘综合网久久,狠狠射日日
    100. 2019最新中文字幕在线观看,电影在线观看,2019中文字字幕在线不卡
    101. 天天看_天天看高清视频_天天看高清影视在线_天天看高清_天天看影院
    102. 最新无码专区在线视频,最新高清无码专区,欧美av无码高清在线-首页
    103. 亚洲成在人线免费视频,大量偷拍情侣自拍视频,在线视频亚洲 欧洲
    104. av日本,婷婷色香五月综合缴缴情,怡红院成人,五月丁香综合缴情六月
    105. 色色影院,哥哥干影院,哥哥干在线直播,大哥哥干妹妹操电影
    106. 在线高清免费不卡无码,欧美av在线观看,波多野结衣丝袜AV在线观看
    107. 奇米影视,奇米网,米奇影视777,奇米影视盒,吉利影院,奇米色,奇米网
    108. 自拍区偷拍亚洲视频国产自拍视频在线_国产偷拍99线观看_色综合
    109. 伊人大香线蕉精品在线国内在线中文字幕大香蕉导航_国产依人在线
    110. 建湖县
    111. 综合自拍亚洲综合图区大香蕉在线看片91电影院,男人的天堂
    112. 阳江市
    113. 在线精品国产在线视频,在线看片免费人成视频,一本大道香蕉大l在线
    114. 伊人大香线蕉精品在线国内在线中文字幕大香蕉导航_国产依人在线
    115. 激情图片 激情小说 伦理电影 快播电影 QVOD经典 快播伦理
    116. 伊人成人综合,伊人成综合人网,伊人222综合网图片,Av在线伊人综合网
    117. 欧美免费观看全部_久久女婷五月综合色啪
    118. 久久精品视频,久久精品在线视频,AV在线视频成人社区久久
    119. 久久播_久播电影网-亚洲人成电影网站免费-青青草观看-大香蕉视频 大香蕉网
    120. 梓潼县
    121. 欧美大片免费流量 福利免费院欧美一级毛片免费高清我 免费毛片
    122. 在线播放免费成人视频-啪啪啪视频大全_成av人电影在线观看
    123. 操逼网站夜夜干干伊人9在线观看免费观看1自拍超碰caoporn
    124. 日本最新一道本aⅴ高清无码va亚洲va天堂va视频在线韩国性爱视频
    125. 曰本三级片,婷婷五月综合色啪在线观看,成人免费图片
    126. 日本免费av毛片在线看,岛国爱情动作片,岛国片在线播放97
    127. 午夜视频大香蕉久久精品色费10日日干夜夜操高清视频色和尚视频
    128. 婷婷六月丁香综合基地,色偷偷男人的天堂a v,免费可以看污的完整视频软件
    129. 国产人妻少妇精品视频,精品国产福利在线视频,午夜私人成年影院
    130. 2019天天擼一擼天天啪_天天啪媽媽鲁播_天天啪久久爱视频精品
    131. 丁香五月开心婷婷综合_丁香花久久五月综合网_五月激激激综合网
    132. 国产女人_国产精品香蕉视频在线_国拍自产亚洲_在线观看国产AV每日
    133. 福利免费50集-92午夜免费福利757-午夜福利1000集合集92集在线
    134. 亚洲人成视频在线播放 - 男人都来的每日更新的免费在线视频网!
    135. 亚洲 另类 欧美 日本
    136. 原平市
    137. 万州区
    138. 托里县
    139. 日土县
    140. 日久干草青青视频免费
    141. 2018天天看夜夜看狠狠看 欧美adc性交视频
    142. 临海市
    143. 一级a做爰片免费观看大香蕉,大香蕉网,大香蕉在线影院偷拍久久国产视频
    144. 天堂va全国最大的色情网坫男人的天堂国内偷拍在线视频, 歐美a片v
    145. 与女神同行 电影|未来影院|网友自拍区|成为人视频免费视频免费观看
    146. 在线观看视频a免播放器_漂亮人妇被强了在线观看_美女网站免费观看视频
    147. 鄢陵县
    148. 欧美Av无码高清在线_日本无码高清免费_在线中文字幕日本无码欧美
    149. 很很鲁在线视频色综合在线777米奇奇米奇影院青娱乐极品视觉精品
    150. 伊人大香线蕉影院在线播放一本道久综合在线费观看三级黄线在线
    151. 龙海市
    152. 一本道理高清在线播放_一本道理在线不卡免费_一本道久在线88综合
    153. 欧美群交_亚洲图片网_欧美人曽交流_欧美巨乳_欧美情色
    154. 齐齐哈尔市
    155. 四虎永久在线精品免费 国产亚洲精品福利视频在线观看 久久精品久精品99热
    156. 大香焦依人在钱免费版 久久乐tv免费,久久乐免费38,182ty大香焦官网
    157. 99热在线视频观看免费,婷婷色婷婷开心五月四房播播,亚洲第一狼人,色迷迷
    158. 在线视频v视频,快播大片,自熨直播全集,黄网站你懂我意思吧,三级片在线观看
    159. 荣昌县
    160. 日本一大免费高清2019免费老鸭国产专区亚洲偷偷自拍男女视频
    161. 2018天天看夜夜看狠狠看 欧美adc性交视频
    162. 外国人的性插图动态图,久久国产av偷拍在线,亚洲,在线视频,亚洲在线av
    163. 汕头市
    164. 日日摸天天摸人人看,日日摸天天摸人人看在线观看,日日摸天天摸人人看最新777
    165. 巨波巨乳在线中文字幕,巨乳彼女の姉在线观看,巨乳制服的誸惑
    166. 在线a亚洲视频简约网址导航在线观看黄色视频福利片135
    167. 一级香蕉视频在线观看 一级大香蕉视频在线观看做爰片住线观看
    168. 91福利导航V_欧美AV_AV在线视频成人社区,男人的天堂东京热
    169. 国内自拍久久久久影院-国产偷伦视频片-亚洲日韩国产无码
    170. 日久干草青青视频免费_日本近親倫亂中文字幕av視頻
    171. 久久国产夫妻性爱自拍超多水无弹窗_久久国产夫妻性爱自拍超多水
    172. 白玉县
    173. 开心婷婷五月综合基地
    174. 国产偷拍国产精品网-国产网友自拍 偷拍-国产精品-国产自拍
    175. 永年县
    176. 奇米影视777,奇米影视四色,影音先锋av资源撸色.成人网黄片
    177. 美女天天看高清影视在线_午夜神器天天看免费高清影视_国产高清
    178. 国产a片-人人爱大香蕉-男人的天堂v-伊人大香蕉网站-大香蕉在线
    179. 江达县
    180. 色色影院_哥哥干影院_哥哥干在线视频_哥哥干妹妹操电影
    181. 延长县
    182. 777奇米第四色在线影视奇米影视盒狠狠地撸2018最新版久久爱免费
    183. 情色综合,亚洲色姐妹综合网姐姐,大香蕉综合伊人网,狼人干伊人网
    184. 福利免费50集-92午夜免费福利757-午夜福利1000集合集92集在线
    185. 日日摸天天摸人人看,日日摸天天摸人人看在线观看,日日摸天天摸人人看最新777
    186. 在线精品国产在线视频,在线看片免费人成视频,一本大道香蕉大l在线
    187. 羞羞妹_青青草视频,青青草在线视频免费,青青草视频免
    188. 色琪琪av男人的天堂-琪琪see色原网色原网站-天天谢天天谢天天要-欧美成人视频
    189. 午夜电影街_国产a在线不卡_特级a欧美做爰片_一本道理不卡一区
    190. 日久干草青青视频免费|浴室一家亲
    191. 中文字幕我爱大香蕉久草在线,新免费观看资源站伊人大香线蕉精品在线播放
    192. 超碰久久人人摸人人搞_久久成人视频_久久996热在线播放_久久爱视频
    193. 国语自产精品视频在_九九热线有精品视频6
    194. 日本高清免费观看 日本高清免费一本视频 日本高清视2018色视频
    195. 图片区偷拍区 小说区,小说区视频区照片区,小说区 图片区 综合区
    196. 亚洲成女人图区,偷拍 拍自 欧美色区巨大在花唇上滑动然后挤进入
    197. 亚洲欧美中文日韩v在线,四虎澳门高清在线观看,国产自拍,在线观看
    198. 2015天堂网久久做爱视频欧美成av人片在线观看久久爱青青草视频
    199. 奇米影视777,奇米影视四色,影音先锋av资源撸色.成人网黄片
    200. 昭苏县